Metal tag COMBI
Dual Frequency NFC + UHF RFID tag
COMBI has been designed for industrial logistics and traceability applications and it integrates a double technology in a single tag: NFC for proximity communications with smartphones and UHF RFID for long reading distance with industrial handhelds or gates. It is also possible to customize it with laser engraving with LOGOS, BARCODE or QRCODE.
COMBI guarantees excellent performance in terms of reading distances even when applied on metal, it has an IP68 protection and can be fixed with screws, rivets or with 3M double-sided tape specific for outdoor applications.
Application field
- asset tracking
- logistics
- industries
- warehouse
- Waste management
Physical / Mechanical Specification
| Dimensions | 95 x 35 x 8 ± 0.2 mm |
Hole Diameter |
Ø 5.0mm |
Weight |
26 g |
Encasement |
ABS |
Colour** |
Grey |
Quality Assurance |
100% reader tested |
Electrical Specification UHF
| Air Interface Protocol | ISO/IEC 18000-6C – EPC Global C1G2 |
Operational Frequency |
865 – 868 MHz or 902 – 928 MHz |
Chip** |
Alien Higgs-3 |
EPC–96 bits – extendible to 480bits |
|
TID – 96 bits unalterable unique |
|
User memory – 512 bits |
|
Access password – 32 bits |
|
Kill password – 32 bits |
|
Read Range* |
On metal – Up to 10m |
Off metal – Up to 2 m |
Electrical Specification NFC
| Air Interface Protocol | ISO / IEC 14443 Type A – fully comply to NFC Forum type 2 |
Operational Frequency |
13.56 MHz |
Chip** |
NXP NTAG213 |
144 bytes freely available for user read/write area in 36 pages |
|
Data transfer of 106 Kbit/sec |
|
Read Range* |
Up to 20mm |
| * |
Actual Read range may vary depending upon the reader and environmental factor |
| ** |
Other on request |
AB700
IDN RFID CARTY
