FAST LANE SYSTEMRFID GATE PASSIVE SYSTEM UHF
FAST LANE SYSTEM is an all-in-one RFID UHF – ISO 18000-6 (EPC Global) system specially designed and designed to monitor and manage the access of trucks, trailers, trailers and containers that pass through access gates. FAST LANE SYSTEM identifies, in a reliable and secure way, the RFID TAG applied in any position and condition, discriminating also the single passage lanes.
FAST LANE SYSTEM is a UHF RFID system that can read any RFID TAG (from any manufacturer) that complies with the ISO standard and has the appropriate characteristics to be read by the gate. For each FAST LANE STATION line you can read several RFID TAGs for each single pass with reliable reading distances of 6 m / 8 m.
The modular architecture of FAST LANE SYSTEM consists of one or more FAST LANE STATIONS (one for each lane) and a centralized FAST LANE MANAGEMENT SOFTWARE.
The MANAGEMENT SOFTWARE allows the management of the information received from the various stations, the setting of the system parameters, the diagnosis and maintenance activity, and remote assistance.
caratteristiche principali
for the reliable and efficient reading of RFID TAGs that cross the gate.
For the discrimination of RFID TAG readings on adjacent lines.
For continuous optimization of reader parameters for optimal performance in every environment.
For easy maintenance or installation / replacement procedure.
For 24H continuity of operations and service.
IDNOVA® The main information that the MANAGEMENT SOFTWARE is able to provide are:
- serial number of the RFID TAG
- identification of the gate
- identification of the lane number of the gate
- date and time of reading
- quality of readings for each RFID TAG
- registration sequence in the case of 2 RFID TAGs that cross the gate at the same time
- generation of log files
Principali caratteristiche hardware FAST LANE STATION :
| Operating Frequency | 865-869 MHz; ETSI EN 302-208 |
| Available protocols | ISO 18000-6C; EPC Class1 Gen2 |
| Antennas | Special Embededd antenna system |
| RF power | Programmable via software up to +32.5 dBm (until +30dBm if i use POE) |
| Reader power supply | POE IEEE802.3 o 24 Vdc 0 8A via external power supply |
| Power supply | 100-240 Vac; 50/60Hz |
| Communication ports | Ethernet 10/100 Base-T Ethernet (RJ45); RS232; USB2.0 |
| External sensors / photocells | for trigger signal |
| Address configuration | DHCP; Static; LLA + mDNS |
| Storage temperature | Da -40°C a +85°C |
| Environmental conditions | -Operative temperature: -20°C + 50°C / -Stock temperature: –20 °C +60 °C |
| Dimensions for basic module | 300 x300x100 mm |
| Weight | 4000g |
| Certification | CE |
| Housing | Metallo e ABS |
| IP protection | IP65 |